Sent Datasheet sending
Sending the product data sheet to your e-mail address.
Inquiry sent Information
Request information about the product to your e-mail address.
Instruments / Auto Engine Analyzer BackHOLDPEAK 760JVehicle diagnostic instrument, 3-4-5-6-8 cylinder, RPM, closing angle, pulse, temperature.
It is a diagnostic instrument suitable for many electronic measurements, which can be used in vehicle electrics.
- Digital diagnostic tool for vehicles. - Manual measurement limit switching. - 3-1/2 digit LCD display with switchable backlight. - Maximum value display: 1999. - Measurement limit display. - Specifying a minimum and maximum value limit. - Last measured data storage function. - Automatic negative polarity display. - Automatic device shutdown after 30 minutes of inactivity. - Low battery voltage indication. - Reading time: 3 readings/sec. - Rotational speed (RPM) measurement range/accuracy: - 600-10000 / +/-1.5%. - Pulse measurement range/accuracy: - 0.1ms-10.0ms / +/-2.5%. - Operating period measurement range/display resolution/accuracy: - 0.0%-90.0% / 0.1% / +/-2.5%. - Measurement of closing angle for 3,4,5,6 and 8 cylinder engines. - 3-cylinder engine closing angle measurement range/accuracy: - 0°-120.0° / +/-1.5%. - 4-cylinder engine closing angle measurement range/accuracy: - 0°-90.0° / +/-1.5%. - 5-cylinder engine closing angle measurement range/accuracy: - 0°-72.0° / +/-1.5%. - 6-cylinder engine closing angle measurement range/accuracy: - 0°-60.0° / +/-1.5%. - 8-cylinder engine closing angle measurement range/accuracy: - 0°-45.0° / +/-1.5%. - Temperature measurement range/display resolution/accuracy: - -20°C-1000°C / 1°C / 0-400°C: +/-0.75%, 400°C-1000°C: +/-1.5%. - -4°F-1800°F / 1°F / 0-750°F: +/-0.75%, 750°F-1800°F: +/-1.5%. - VDC measurement range/display resolution/accuracy (automatic measurement limit switching): - 200mV / 0.1mV / +/-0.5%. - 2V / 1mV / +/-0.5%. - 20V / 10mV / +/-0.5%. - 200V / 100mV / +/-0.5%. - 1000V / 1V / +/-1.5%.- Input resistance: greater than 10Mohm. - Input resistance in VDC measurement mode: 10Mohm. - Overvoltage protection. - VAC measurement range/display resolution/accuracy: - 2V / 1mV / +/-1.5%. - 20V / 10mV / +/-1.5%. - 200V / 100mV / +/-1.5%. - 750V / 1V / +/-2.5%. - AC voltage frequency range: 40Hz-400Hz (2V-200V), 40Hz-200Hz (750V). - Input resistance in VAC measurement mode: 10Mohm. - ADC measurement range/display resolution/accuracy: - 20A / 10mA / +/-2%. - Overcurrent protection with internal 20A fusible fuse. - Resistance measurement range/display resolution/accuracy: - 200ohm / 100mohm / +/-1.5%. - 20kohm / 10ohm / +/-1%. - 200kohm / 100ohm / +/-1%. - 20Mohm / 10kohm / +/-1%. - 200Mohm / 1kohm / +/-2.5%. - Diode test, 1.5V/1mA. - Tear test with sound signal. - Transistor hFE testing. - Measurement of NPN and PNP transistors. - Test voltage/current: Ib=10uA/Vce=3V. - Measuring tape. - 2 insulated alligator clips. - Temperature measuring probe. - Support bracket that can be folded out 180°. - Black fabric instrument bag. - Power supply: 9VDC from 6F22 battery. - Operating temperature: 0°C-40°C. - Operating humidity: maximum 85%. - Dimensions: 190mm x 88.5mm x 27.5mm. - Weight: 320g (with battery). - CE certification.
Most often purchased with the product:HOLDPEAK 880EKHOLDPEAK 883AHOLDPEAK 5800DHOLDPEAK 882AHOLDPEAK 9234CHOLDPEAK 5105AHOLDPEAK 7000AHOLDPEAK 815AInstruments / Auto Engine AnalyzerBack New page × | ||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2024 security-europe.eu © | DELTON | All rights reserved.
|
Our website uses cookies to make it easier to use, to which you contribute by further browsing. Information | × |